|
Post by Paul Ernst on Aug 23, 2021 23:51:43 GMT -5
|
|
|
Post by Paul Ernst on Aug 23, 2021 23:58:17 GMT -5
The suspect shooter like a sardine in a can (Ha,ha,ha)! Problems with sitting on that box . Problems with rifle elevation, (verticaal and horizontal. How would he made his first shot and the third shot? Problems with ejected shells, (position on the floor)! Problems with the airco pipes! Problems to place his feet! Problems with observation angle overall, and a oak in his shooting trajectory!
|
|
|
Post by Paul Ernst on Aug 24, 2021 19:48:16 GMT -5
|
|
|
Post by Paul Ernst on Aug 25, 2021 21:06:54 GMT -5
Some at that other forum say that the wall under the window is to high. (Mr Organ) 1. And that is correct, but they "forget" to explain that the rest of the model including the shooter is adjusted to the wall size and the used TEXTURE! 2. They "forget" to mention the diagrams on scale I posted for further explanation! 3. They "forget" to mention the rest of my points and post about this subject I mentioned earlier! And still after years and years they are not come any further then something Organ presented! Still after years the don't present a whole model of that snipernest from different angles and perspectives! Made by Organ His comment.... and my response Now I had been concentrating on the face when I did that model. (Yeh yeh...LOL)!The arms were in a neural position and I simply hid them, figuring the viewer could imagine the rest. (Yes imaging more LOL). I can now articulate all the limbs and even make the facets around the joints connect back up (in SketchUp, it has to be done manually and is time consuming). (Then don't post ....LOL)! I didn't post a graphic of the SN-in-3D until I had reasonably accurate models of the figure, the Carcano, the cartons, and the building environment. (Then don't attack other persons).Now here's Ernst's current progress ... (Still better then your trash'he.he.he)
|
|
|
Post by Paul Ernst on Sept 11, 2021 18:41:11 GMT -5
What nutters not debate or not like to debate.Unfortunately for the nutters again. The shooter in a sitting position could only have a horizontal angle of max. cover 35 degrees. That's almost 10 degrees too little. For the first shot and not even sitting he had according to Mr. Holland needed a horizontal angle of 6 degrees. From this position the shooter should shoot through the walls and or pipe.
|
|
|
Post by Paul Ernst on Sept 13, 2021 19:35:11 GMT -5
They tried to copy the shooter shot. They failed again.In green the armpit. In red the laser pointer from the experimental team. 3D check
|
|
|
Post by Paul Ernst on Sept 21, 2021 8:41:31 GMT -5
Trajectory of a Lie There is no evidence, hard or soft, that supports the single bullet theory (SBT). Its defenders have spent a lot of time proving that it could have happened that way, which is not the same as proving that it did, a distinction they don't make. But the can't even prove it hypothetically because the sniper's nest and the various wounds of Kennedy and Connally do not line up. By Milicent Cranor; Very interesting article to read! History matters. history-matters.com/essays/jfkmed/BigLieSmallWound/BigLieSmallWound.htm
|
|
|
Post by Paul Ernst on Sept 27, 2021 4:07:39 GMT -5
Some people jump from left to right and from top to bottom without research or proof and post the most ridiculous pictures. So if Oswald was not kneeling or and standing the FBI was lying is it?Have you ever seen a 3D proof from the nutters how he in a kneeling or sitting positon took the three shots? Sitting in a total different way and SN configuration. Sitting on a double high crates to attempt to see the target dot, he failed.
|
|
|
Post by Michael Capasse on Sept 27, 2021 18:32:30 GMT -5
Hi Paul - I saw the lame posting on the other forum by nutters Organ and Chapman posting goofy postcards and cartoons with no explanation
Notice they have no actual facts or description to demonstration proof - remember all they need to show is the measurements and angle from the armpit to the floor
But Organ's figure doesn't even have an armpit - lol
|
|
|
Post by Paul Ernst on Oct 7, 2021 20:20:55 GMT -5
Hi Mike,
I did some further math on the snipers nest.
Window opening is 19 inch confirm by Arlen Specter
~4.3 inch space between window opening and box see CAD drawing on this forum snipers nest.
Bud plate and scope need ~ 9.22 inch totally.
So that will be very tricky for a sniper/marksman/shooter and not enough free space to make any shot or and to move
the rifle up and down.
All data measurement with CAD program.
|
|